A repeater basically takes the signals from the modem and then repeats it over to the whole house or your house. It is used to spread the the network which the repeater is taking from the main source to a larger area and help in wirelessly connect to the network. In this article we are going to talk about how to setup the repeater, also Wireless n Wifi Repeater login in easy steps.
Setup and login of the repeater
The setup and the login can be done in two ways let’s talk about both of them one by one.
Setup by the WPS method
- Place the repeater and the router in the same room, plug in your extender in a power source and turn it on.
- Press the WPS at the back of the router. It can also depend on the model so the WPS button can also be on the front.
- Within two minutes press the WPS button on your repeater. The WPS button can be present at the back or maybe in front depending on the model.
- To build the connection it might take ten to fifteen minutes. If a solid light appears on repeater, it means the connection is done.
- Open your WiFi settings you go down and you will see a new name on the list connect to it.
- The password remains the same as of the initial network.
Connecting with help of a web browser
- Plug in your repeater in a socket and turn it on.
- The green LED light will turn and the WiFi light will blink.
- Connect your phone or computer to the repeater, open your setting and go to the WiFi section and look for Wireless N network name and click on it.
- Your device will be connected to the repeater.
- Open your web browser on the connected device, in the search tab type 192.168.42.1 Or 192.168.1.1.
- The login page will appear.
- Enter your username and password, they are mentioned on the label or on the user manual.
- Click on the repeater mode to on the screen.
- The website will automatically detect the list of networks present near it.
- Enter the password which you entered while logging in. click on apply it and apply the settings it might take sixty seconds to apply the new settings. Later connect your device to the WiFi.
So, your setup and login would be done by following these steps. Sometimes due the old update your repeaters doesn’t work properly. Doing the firmware update can help you in enjoying the latest features in the repeater. This could be help to fix the bugs and glitches, improve security and much more.
Firmware Update
Follow these steps to easily update the firmware.
- Setup your repeater with the steps given up.
- With your connected system, open your web browser and type myrepeater.net login in the search bar. Click on enter.
- Login to the web page by entering your user name and password.
- After logging in, go to the firmware tab or system tools tab. This could be found under the settings> maintenance or advance tab.
- Click on the browser tab and select the downloaded version or firmware from your device
- Click on the update button on the screen.
Your firmware update will get completed until then do not open any new site or the update could stop. Check the new firmware carefully and enjoy the new features.
The conclusion
So, the process is completed for setup, login and firmware update. We wish you were able to follow the steps and do the needful. These were the easiest way to do the following go through the steps thoroughly and enjoy the features.
