These days, we can access the internet wirelessly from virtually any location and on any device we want. Although few people are aware of it, WiFi can be utilized at frequencies ranging from 2.4GHz up to 5GHz. Both of the bands come with their own set of benefits and drawbacks, but we need them both to have the most reliable internet connection possible in our homes and workplaces. But what if the 2.4GHz band is not working on your Wavlink WiFi extender The purpose of our writing this post is to determine what the reason is dragging you to this issue and how it can be resolved.
Fixed: Wavlink Not Working on 2.4GHz Band
Give the Wavlink Extender a fresh start
When there is a problem with a network, rebooting the Wavlink extender can often fix the problem. It can be restarted in several different ways, depending on the Wavlink model, but the tried-and-true method of simply turning it off and on again should work just fine for the great majority of devices.
The connection speed will significantly improve after the issue with the 2.4GHz WiFi has been resolved.
Alter the settings for the WiFi mode
Due to the WiFi mode, it is possible that 2.4 GHz WiFi will not be detected. Different electronic devices have different operational criteria that must be met before they can join to a network and begin functioning. The majority of electronic devices, such as your phone, computer, and tablet, should continue to operate normally; but there is a possibility that you will need to change the wireless mode on some of them.
Go to the Wavlink WiFi extender setup wizard if you want to change the settings for the extender’s wireless connection. It seems as though there are a few choices, so why don’t you experiment with a few of them and see what happens?
Alter the WiFi Channel You’re Using
Even though it is the most common frequency for long-range broadcasts, the 2.4GHz band only contains 11 channels that users can access. However, the increased channel capacity and quicker connection speeds of the 5GHz band come with the penalty of poor reception in larger buildings and households. This is because the 5GHz band operates at a higher frequency.
Because of this, having a solid understanding of channels is necessary, as this will help you save a significant amount of hassle. You should either do it manually or make use of software developed by a third party if you want to be certain that you are making use of the greatest available internet connection and the channel with the fewest number of users for your 2.4GHz equipment. If the device is unable to successfully reconnect to the network, you should try changing the channel it is listening on.
Update Firmware
If the band and WiFi were running normally before the 2.4 GHz frequency suddenly stopped working, then it is probable that an older version of the Wavlink firmware is at blame. There is a possibility that the firmware of the extender is not up to date, or that the most recent upgrade may have caused some issues.
The majority of the time, the updates can be downloaded in their entirety directly from the official Wavlink website. If the problem was caused by out-of-date firmware, then it needs to be fixed as quickly as possible.
Endnote
It is essential to find a solution to the problem with the Wavlink extender 2.4GHz WiFi not working issue. This is because it may also prevent you from logging into Wavlink extender. It is our sincere hope that this post would be of use to you in resolving the issue at hand.
If things are still not bringing you luck, you simply reset your Wavlink range extender and again perform the Wavlink setup from scratch. This might be of some use to you when it comes to fixing the long-going issue and making the most of your device.
